cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
315
Views
0
Helpful
1
Replies

HA pairing possibility? two ASA5520s- one with Anyconnect Essentials the other with Anyconnect Plus licensing - can these two equivalent license types HA pair successfully?

hmcandrew
Level 1
Level 1

I have two ASA5520s ... one has 750 Anyconnect Essentials licenses and the other has 750 Anyconnect Plus licenses.

Can these two successfully HA Pair or do I need to have them both on the same exact license type?  i.e. both on Anyconnect Plus....

Thanks!

Hal

1 Accepted Solution

Accepted Solutions

carlguer
Level 1
Level 1

Hi hmcandrew,

As far as I know you need to exact ASA's one from the other one to be able to run in failover mode.

Maybe if you run them in a vpn load-balancing set up they will be able to work, but this won't give you HA.

Please check the following link for more information:

https://supportforums.cisco.com/document/67701/asa-versions-image-names-and-licensing

Please rate if you find this information helpful.

Regards,

-Javier- 

View solution in original post

1 Reply 1

carlguer
Level 1
Level 1

Hi hmcandrew,

As far as I know you need to exact ASA's one from the other one to be able to run in failover mode.

Maybe if you run them in a vpn load-balancing set up they will be able to work, but this won't give you HA.

Please check the following link for more information:

https://supportforums.cisco.com/document/67701/asa-versions-image-names-and-licensing

Please rate if you find this information helpful.

Regards,

-Javier-