03-03-2016 06:40 AM - edited 02-21-2020 08:42 PM
I have two ASA5520s ... one has 750 Anyconnect Essentials licenses and the other has 750 Anyconnect Plus licenses.
Can these two successfully HA Pair or do I need to have them both on the same exact license type? i.e. both on Anyconnect Plus....
Thanks!
Hal
Solved! Go to Solution.
03-03-2016 03:50 PM
Hi hmcandrew,
As far as I know you need to exact ASA's one from the other one to be able to run in failover mode.
Maybe if you run them in a vpn load-balancing set up they will be able to work, but this won't give you HA.
Please check the following link for more information:
https://supportforums.cisco.com/document/67701/asa-versions-image-names-and-licensing
Please rate if you find this information helpful.
Regards,
-Javier-
03-03-2016 03:50 PM
Hi hmcandrew,
As far as I know you need to exact ASA's one from the other one to be able to run in failover mode.
Maybe if you run them in a vpn load-balancing set up they will be able to work, but this won't give you HA.
Please check the following link for more information:
https://supportforums.cisco.com/document/67701/asa-versions-image-names-and-licensing
Please rate if you find this information helpful.
Regards,
-Javier-
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide