10-03-2021 05:12 PM - edited 10-03-2021 05:14 PM
Hi all, appreciate if you can assist or clarify how to assign 2 different ip subnets ( or 2 different ip pool) on dhcp server to anyconnect client? I prefer to select a ip from first subnet and when the pool run out, client will try to reach second pool to select ip from it.
thanks!!!
Solved! Go to Solution.
10-04-2021 12:00 AM
Do you want to use DHCP or a local pool on the ASA? Try the following:-
DHCP Scope
dhcp-network-scope 192.168.14.0
dhcp-network-scope 192.168.15.0
IP Pool
ip local pool POOL_1 192.168.14.10-192.168.14.254 mask 255.255.255.0 ip local pool POOL_2 192.168.15.10-192.168.15.254 mask 255.255.255.0
group-policy GP-1 attributes
address-pools value POOL_1 POOL_2
10-04-2021 12:00 AM
Do you want to use DHCP or a local pool on the ASA? Try the following:-
DHCP Scope
dhcp-network-scope 192.168.14.0
dhcp-network-scope 192.168.15.0
IP Pool
ip local pool POOL_1 192.168.14.10-192.168.14.254 mask 255.255.255.0 ip local pool POOL_2 192.168.15.10-192.168.15.254 mask 255.255.255.0
group-policy GP-1 attributes
address-pools value POOL_1 POOL_2
10-04-2021 05:08 AM
Thanks Rob,
I am actually doing this TS research for my friend, he told second cli ( dhcp-network-scope 192.168.15.0) take privilege.
I will do some testing on my lab.
thanks you again Rob.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide