Dear all,
please help to advise and share document for configuration VPN site to site with NAT on Firepower 1010.
we are planning configure VPN from HQ to oversea by VPN site to site.
as below are ip address.
HQ
Local IP : 192.168.10.x/24 -> NAT 10.95.95.0/30
public IP : 203.x.x.100
for tunnel VPN we allow 10.95.95.0 to 20.20.20.0 ( local ip at Branch)
so our client 192.168.10.x access to 10.95.95.0/30 before connect to 20.20.20.0 at branch site.
how to configure this case?
Best Regards,
