How to create a VPN Between a PIX 501 and a VPN 3000 Concentrator

[RobboRobson]

Hi

Does anyone have any guides or how to for creating a VPN between the Cisco VPN 3000 Concentrator and a PIX 501?

Thanks

James

[scoclayton]

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

Does this help?

Scott

[sachinraja]

Hi james,

You can find an example on the URL given below:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2284/products_configuration_example09186a00800949d2.shtml

let us know if this helps..

Raj

[RobboRobson]

Hi

Thanks for the links.

I have followed through the manuals and it appears that i have created the link between the Concentrator and the Firewall but i can't ping or see any computers on either private address.

Do i need to do anything else or does anyone know what i am doing wrong??

Thanks

James

[sachinraja]

Hi james,

Can you be more elaborate on ur setup ? private lan ips etc ??

actually, as given in the document, if you had configured the ipsec policies, maps, ACLs etc correct, you will have no problems.. there might be many reasons for your problem.. we need to narrow down and find the issue..

try sending ur PIX config to us.. hide out any public IPs if needed.

Raj