VPN

I have a new Dell laptop with XP home and SP2 installed. Using latest Cisco 4.0.5 client I am unable to IPSec connect to a Cisco PIX firewall. However, with same client installed on another PC with XP Pro/SP2 on home LAN the connection works as exp...

Dear \ AllI have Cisco soho 78 g.shdsl, to be working with g.shdsl interface for Conkilin dsalm :http://www.conklin-intracom.com/pdf/AL20DS0103.pdfthe problem is the router dsl int. didn,t brought up . while we configured the dsl as told from our ser...

When using PIXs for VPN is it possible to have a hub and spoke VPN model or is a full mesh model required to have remote sites talk to each other.Thanks.

Hello all As a total VPN Newbie i tried to start the right way so i set up an little Lab with my spare PIX and try to VPN to it from my personnal computer at home....With no luck so far ,)I don't understand the way to configure it.. even after readin...

When using PIXs for VPN is it possible to have a hub and spoke VPN model or is a full mesh required to have remote sites talk to each other.Thanks.

Hi Folks!!!I hv configured remote access ipsec VPN using PIX-515E(3DES & MD5 used) This has been primarily configured for accessing a webserver which is in the internal network.I hv checked the access thru dialup connection & checked the access to th...

The tunnel is established via 4.6 client and I am seeing traffic being transmited and encrypted from the client by the 3030 w/4.1.7 but nothing is transmitted back from the 3030 to the client. Doesn't appear to be routing - can connect/ping to both p...

Hello,We are using check point VPN client in our LAN , previously ever thing was working fine but now as we have implemented PIX firewall in our LAN we are unable to connect the Check point Policy server .If any one also faced similar problem than pl...

Hi, I have just upgrade my AS5350 from 12.2(XA)5 to 12.2(15)T14. Something strange happen to my default route as show:-AS5350#sh ip routeCodes: C - connected, S - static, R - RIP, M - mobile, B - BGP D - EIGRP, EX - EIGRP external, O - OSPF, ...

Once a VPN tunnel is established to the concentrator, clients can ping/telnet/hack! the other clients connected to the same concentrator, using the secure tunnel.I'm using the CiscoVPN client, so I figured I could push policy settings to the integrat...

I need to translate destination IP , of packetsgoing in from outside interface to Inside interface,Part of the outside world are working with Host APart of the outside world are working with Host Band we need to direct them to Host A .Any ideas how t...

I am using a PIX 515 to terminate tunnels. I have added the4 port ethernet card to the PIX and I terminate one tunnel on interface ethernet 5 using a static crypto map. The tunnel works fine and I can access devices inside the PIX. Applications wo...

Hello,We are using check point VPN client in our LAN , previously ever thing was working fine but now as we have implemented PIX firewall in our LAN we are unable to connect the Check point Policy server .If any one also faced similar problem than pl...

I have a VPN 3005. Users either use the webvpn client or the cisco software client to vpn into our local lan. I on the webvpn home page I have added a link to an internal web server that is running a site that was written in .net and uses java and ...

Hi All,If I want to bundle multiple ISDN links, is it using rotary group? If so, can I configure a single number for two ISDN lines? or Is it a telco issue?Regards,mak