07-28-2009 12:57 PM
hi
I (10.32..64.168) can SSH into PIX but cannot HTTP into it ? I have added "http server enable" and http 10.32.0.0 255.255.252.0 inside"
inside ip of PIX =ip address inside 10.32.0.5 255.255.252.0
07-28-2009 12:59 PM
Do you see anything on the logs? Can you try using http 0 0 inside instead of the statement you use and try again
07-28-2009 01:13 PM
tried..not working
i do not see anything in logs..
pixfirewall# sh flash
flash file system: version:3 magic:0x12345679
file 0: origin: 0 length:1978424
file 1: origin: 2097152 length:44984
file 2: origin: 2228224 length:1914
file 3: origin: 0 length:0
file 4: origin: 0 length:0
file 5: origin:16646144 length:308
filter url http 0.0.0.0 0.0.0.0 0.0.0.0 0.0.0.0 allow
http server enable
http 10.32.0.0 255.255.252.0 inside
http 0.0.0.0 0.0.0.0 inside
07-28-2009 01:16 PM
What about:
logging on
logging buffered 7
try your http connection to the pix and then do a "show log" do you see anything for the ip address you are coming from?
Go ahead and run captures on the inside and see if the asa sends any weird packet.
Have you tried regenerating the rsa key?
07-28-2009 01:22 PM
it is pix not asa
07-28-2009 01:24 PM
Yes, so? captures and log are the same on the pix/asa
07-28-2009 01:27 PM
07-28-2009 02:22 PM
PDM is not installed in it,can I still http into it ?
07-28-2009 02:24 PM
No you need pdm to https into it...
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide