Hello,
I am writing this message on the forum because I get some difficulties to configure the Cisco SRP547W. With another router (other brand) I do not have any problems. The SRP547W can contact Internet (ping OK for the 1st gateway or Google website), but I can’t ping any of them from my Lan. In fact the only thing I can ping from my Lan are SRP547W interfaces (Lan and DSL).
![SRP547W Configuration problem.png](/legacyfs/online/legacy/1/1/0/69011-SRP547W%20Configuration%20problem.png)
The routing table is :
Network | Submask | Gateway |
12.12.12.0 | 255.255.255.0 | …….. |
12.0.0.0 | 255.0.0.0 | …….. |
0.0.0.0 | 0.0.0.0 | 12.18.13.98 |
The Nat is inactive. I create a rule on the firewall which permits everything. I tried to add new static routes with the Ip address of the gateway but without success (the gateway 12.12.12.1 is active in the DHCP configuration). I should have missed something….
Thank you for your help,