06-17-2016 12:17 PM
I am doing ikev2 VPN with the ASAs and the sites have dynamic IP. One solution is to do a site to site vpn, configure headoffice ASA with dynamic crypto map and the client asa with static crypto maps and put peer of of headoffice IP.
However a better approach was to be the classic ezvpn scenario but I cant find a doc or config reference for ikev2. Is this supported using ikev2 or the only option I have the one i described above?
Solved! Go to Solution.
06-17-2016 07:40 PM
Hi,
IKEv2 support for Easy VPN tunnels on ASAs is not available, only for IKEv1.
It is available on Cisco Routers, known as FlexVPN:
FlexVPN on Cisco Routers:
https://supportforums.cisco.com/community/netpro/security/vpn/blog/2012/03/19/flexvpn-at-a-glance
Regards,
Aditya
Please rate helpful posts and mark correct answers.
06-17-2016 07:40 PM
Hi,
IKEv2 support for Easy VPN tunnels on ASAs is not available, only for IKEv1.
It is available on Cisco Routers, known as FlexVPN:
FlexVPN on Cisco Routers:
https://supportforums.cisco.com/community/netpro/security/vpn/blog/2012/03/19/flexvpn-at-a-glance
Regards,
Aditya
Please rate helpful posts and mark correct answers.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide