Increase bandwidth Cisco VPN

[neph10]

Hi Cisco community.

Is it possible to increase the vpn bandwidth? we are currently using cisco anyconnect. thank you

[Rob Ingram]

@neph10

What OS are you using ASA or FTD?

What protocol, SSL (TLS) or IKEv2/IPSec?

If using TLS, ensure you are using DTLS 1.2 and AnyConnect 4.7 or newer (preferrably 4.10).  Using DTLS 1.2 will give you better performance. Do not use just TLS as the transport protocol this will result in decreased performance.

Refer to the cisco Remote Access VPN best practice guide for more information.

https://community.cisco.com/t5/security-documents/asa-best-practices-for-remote-access-vpn-performance/ta-p/4070579

[balaji.bandi]

You mean vpn client to server ?

When i did some testing with 4.X client it was around 20-25MB, after latest 4.9X onwards i could able to get more than 100MB

[MHM Cisco World]

increase BW of Anyconenct, I think it depend on ISP connection of client.
But 
Mr.Rob suggest DTLS and this great solution, 
also try change the MTU for reduce the fragment of packet.