07-24-2022 04:01 PM - edited 07-24-2022 04:06 PM
interface Virtual-Template down status down protocole
i try to create vpn
but in i set this command show ip int brife
interface Virtual-Template is down status down protocole
how i can make it up
this vpn is not workign good . no ping for any ip
Current configuration : 2685 bytes
!
! Last configuration change at 00:12:15 AST Wed Jul 20 2022
!
version 16.8
service timestamps debug datetime msec
service timestamps log datetime localtime
service password-encryption
platform qfp utilization monitor load 80
no platform punt-keepalive disable-kernel-core
!
hostname router1
!
boot-start-marker
boot-end-marker
!
!
logging buffered 10000
enable secret 5 *******************************
enable password 7 *******************************
!
aaa new-model
!
!
aaa authentication login telnet local
aaa authentication ppp default local
aaa authorization network default local
!
!
!
!
!
!
aaa session-id common
clock timezone AST 3 0
!
ip dhcp excluded-address 192.168.1.1 192.168.1.10
ip dhcp excluded-address 192.168.1.110 192.168.1.160
ip dhcp excluded-address 192.168.1.230
!
ip dhcp pool LAN
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 212.43.18.22 95.66.18.22
!
!
!
!
!
!
!
!
!
!
subscriber templating
!
!
multilink bundle-name authenticated
vpdn enable
!
vpdn-group SUP
! Default L2TP VPDN group
! Default PPTP VPDN group
accept-dialin
protocol any
virtual-template 8
no l2tp tunnel authentication
!
!
!
!
!
!
license udi pid ISR4221/K9 sn FGL2416LVKH
no license smart enable
diagnostic bootup level minimal
!
spanning-tree extend system-id
!
!
!
username ******************************* privilege 15 password 7 *******************************
!
redundancy
mode none
!
!
!
!
!
!
!
!
interface GigabitEthernet0/0/0
no ip address
negotiation auto
!
interface GigabitEthernet0/0/0.900
description WAN-Internet
encapsulation dot1Q 900
ip address 172.17.77.174 255.255.255.252
ip nat outside
!
interface GigabitEthernet0/0/1
description LAN-Internet
ip address 192.168.1.1 255.255.255.0 secondary
ip address 31.214.xxx.xxx 255.255.255.248 >> remote ip
ip nat inside
negotiation auto
ip virtual-reassembly
!
interface Virtual-Template8
ip unnumbered GigabitEthernet0/0/1
ip nat inside
peer default ip address pool mvpnco
no keepalive
ppp authentication ms-chap-v2
ip virtual-reassembly
!
ip local pool mvpnco 192.168.1.109 192.168.1.120
ip nat pool LAN 31.214.xxx.xxx 31.214.xxx.xxx prefix-length 29
ip nat inside source static 192.168.1.10 31.214.23.146 extendable
ip nat inside source list 1 pool LAN overload
ip forward-protocol nd
ip http server
ip http authentication local
ip http secure-server
ip route 0.0.0.0 0.0.0.0 172.17.77.173 name Internet
!
!
access-list 1 permit 192.168.1.0 0.0.0.255
!
!
!
!
!
!
control-plane
!
!
line con 0
password 7 xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
transport input none
stopbits 1
line vty 0 4
password 7 13061E010803
transport input all
!
wsma agent exec
!
wsma agent config
!
wsma agent filesys
!
wsma agent notify
!
!
end
Solved! Go to Solution.
07-26-2022 06:19 AM
yes sir it is
ppp encrypt mppe auto
^
% Invalid input detected at '^' marker.
07-26-2022 06:25 AM
interface Virtual-Template8
encapsulation ppp
ppp encrypt mppe auto
07-26-2022 12:48 PM - edited 07-26-2022 12:50 PM
thanx u sir it is working in my router
interface Virtual-Template8
encapsulation ppp
ppp encrypt mppe auto
but on other router have same errror no ping it is not working
router(config-if)#
router(config-if)#interface Virtual-Template8
router(config-if)#encapsulation ppp
router(config-if)#ppp encrypt mppe auto
^
% Invalid input detected at '^' marker.
07-26-2022 01:15 PM - edited 07-26-2022 01:15 PM
how many router you have?
you mean that one router this solution is work and other not?
07-26-2022 02:00 PM - edited 07-26-2022 02:00 PM
yes sir . i have 7 routers
so how i can fix this
router(config-if)#ppp encrypt mppe auto
^
% Invalid input detected at '^' marker.
07-26-2022 05:48 PM
please only share the final config
and the step you config the VPN in windows ( prt screen)
07-26-2022 08:06 PM
this is workign good and it is done
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide