IOS for 2610XM Router using as RAS

[sshrestha]

Dear All,

There is a requirement of one Remote Access Server (RAS) from the customer where we are quoting Cisco 2610XM Ruter as RAS.

My question is to make this router as RAS, do we need to have IOS of Remote Access Server (Cisco 2600 Ser IOS REMOTE ACCESS SERVER) or normal IOS will be OK. If not required when do we need this IOS to be populated in Router.

Also can this router able to handle RADIUS for authentication or not?

Thanks

Suresh

[tepatel]

Any ios with "IP PLUS" feature set in it will work as RAS on that box according to what you need.