10-08-2007 07:10 PM
Dear All,
I have a Cisco Router with IOS Adv.Sec 124-11.T3 with SSLVPN configured. It works very fine.
Yesterday I updated the router to the same IOS, but new realse 124-15.T1, and then the SSLVPN doesn't work more.
Are there diferent configs betwen these IOS Versions?
Best regards,
Cassio Gomes
10-09-2007 06:19 PM
Hi Cassio,
I've seen many customers running 124-15.T1 with ssl webvpn; only be aware about the following software defect:
CSCsk46604
Externally found moderate defect: New (N)
Traffic can not go through for Tunnel CEF with HW crypto
Use BugTookit to see the status:
http://tools.cisco.com/Support/BugToolKit/action.do?hdnAction=searchBugs
Symptom:
SSL tunnel cannot pass traffic when connecting to IOS router. SSL session comes up but traffic doesn't flow.
Conditions:
Problem has been seen on 12.4(15)T. When webvpn cef is enabled, from
time to time the SSL tunnel doesn't pass traffic. It has been noticed
specially after initiating a remote desktop session
Workaround:
disable webvpn cef
Are you using a real router on this test?
Do you have the right amount of memory to run this image?
10-09-2007 06:23 PM
use this link as reference to configure ssl vpn on 124t:
10-19-2007 05:38 PM
Hello Jose,
Thanks for your help
Cassio Gomes
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide