11-10-2008 01:16 PM
I am running ASA 8.0.3 and trying to get my iphone to connect in via IPSEC. It appears that my iphone gets an IP address from the ASA but after about 30 seconds it stops trying to connect and the error that I see in the ASDM is related to a phase2 issue. Any thoughts on what might be happening here?
713201 Group = TEST-VPN, Username = me, IP = 24.114.233.xxx, Duplicate Phase 2 packet detected. Retransmitting last packet.
11-10-2008 04:29 PM
Hi,
What type of encryption have you configured? Make sure that you have IPSec phase 2-3DES or AES encryption with MD5 or SHA hash method.
For example:
crypto ipsec transform-set trans esp-3des esp-sha-hmac
Regards,
Arul
*Pls rate if it helps*
11-11-2008 06:09 AM
Here is part of the config...
sh run | include crypto ipsec
crypto ipsec transform-set low-security esp-aes esp-sha-hmac
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide