Has anyone managed to get the new anyconnect to work on windows running in vmware, or know if cisco is working to resolve it, or at least know why they made it not work?
Hi Guys ,I need to know if it is pos to create a site to site vpn and get it to terminate at our head office where we have an asa5500.Remote office can have a cisco 800 series router running easy VPN??
I need a work around - I have upgraded my ASA to support multiple contexts (two of my clients share infrastructure but maintain two separate ISP), now I dont have VPN for 40+ remote locations
Hi,Is it normal that in EZVPN NEM peers cannot ping each other? All hosts behind the VPN gateways can ping each other over the IPSec tunnel but I coudn't telnet or ssh from one gateway into another.Thanks for any suggestions.Remy
Customer has the same remote networks as some of my local networks. What is the best way to apply Nat accross the tunnel?I'm trying to figure out how to setup "Tunnel Nat" or Nat accross the tunnel.192.168.x.x, 172.16.1.x local192.168.x.x, 172.16....
Hi,I have established a IPSec tunnel between India and Brazil,(india)ASA <--> VPN Concentrator (Brazil)tunnel works 52 mins and then tears down,automatically it will renegotiate and form the tunnel after 8 mins...what could be the isse?
During installation of vpn client cisco version 5.0.00 i had an halt> in phase “ Installing Cisco System virtual adapter “ > i after stopped installation.> > I now can't reinstall cisco client> > looking my system log> > > <> service Cisco Syst...
Hi,I have a DMVPN + OSPF set up. There is some self-encrypted traffic like https and ssh, which I want to sent into GRE tunnel without encryption, since they are already encrypted. Is there any way I can implement this? For instance, sent all traffic...
Help, can anyone point me in the direction of good documentation regarding setting up a site to site VPN between a ASA running 8.04 and a cisco 877 routerI've been searching and not found anything 100% usefulThanks in advance
This is the config information I have on my PIX 506 related to the VPN. I'm trying to clean it up since there is no site-to-site and I guess there is commands in there I don't need. Just want to use the Cisco VPN client and another NCP Secure Entry c...
Hi all!I have a problem puzzling me up for a long time now. I have a 800 series router connected to Internet through ADSL. This line is used as a backup link to our data center from our main office. To accomplish this in a secure and transparent way ...
Please what can be the reason of this error message:%PIX|ASA-3-713119: PHASE 1 COMPLETED %PIX|ASA-5-713050: Connection terminated for peer IP_address. Reason: termination reason Remote Proxy IP_address, Local Proxy IP_address This message indicates t...
When clientless SSL VPN connection is terminated on the ASA, how can the connection be forwarded to the web server for customized login page instead on ASA login page. Is it possible ?
Could you explain or point me to some links that clearly explain how to configure two 5520s in vpn clustering mode using Anyconnect client? Also, will I need equal licensing on both appliances when they're in clustering mode?
HiI would like to clarify what it means if I put 0.0.0.0 0.0.0.0 when I apply this commandcrypto isakmp key cisco123 address 0.0.0.0 0.0.0.0Another questionIf I have a GRE over IPsec access-list 110 permit gre host 14.38.88.20 host 14.36.88.6using th...
