10-06-2003 06:45 AM - edited 02-21-2020 12:48 PM
Hi Sir,
Can someone guide me to find documents stating:
a) How many encrypted tunnels for concurrent sessions can run? and
b) At what PIX utilization level?
Can a PIX firewall handle without VPN accelerator card.
Meaning that just enable IPSec at pix image level without VPN accelerator card.
Thank you,
Raymond
10-06-2003 06:47 PM
The PIX can quite capably handle IPSec tnnels without a VAC, but if you're going to have a lot of tunnels or push a ton of data thru them, then you're better off with a VAC. There's no definate numbers cause it depends on how busy your PIX is, how many sessions are going thru it, etc, etc.
The data sheets are probably your best reference point though (there's one for the VAC specifically here too):
http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_data_sheets_list.html
10-07-2003 05:05 PM
Hi Glenn Fullager,
Thanks for your information but do you have the exact number as per my questions ???
Gotto to show them to my customer and they are serious to buy.
Thanks,
Raymond Hew.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide