IPSEC L2L VPN starting from a natted ip

[power.srvi]

hi,

my cisco asa ar configured as show:

cisco asa <outside int ip 192.168.1.2/30>----------------FIBER---------------------<192.168.1.1/30>Service provider------>internet

1-The network adressing between my cisco asa and the service provider is an private non routable ip adressing ( 192.168.1.0/30)

2-My lan pool are patted to 212.198.4x.xx to join the internet

3-The ip adress used for pat is nat assigned to any physical interface

-How can i configure a site to site vpn using  the public ip adress used for the pat.

regards

[rizwanr74]

Hi Power

What you need is policy-based static-nat, please read the below thread, a soulution already has been provided in the thread and feel free to ask any question you may have.

https://supportforums.cisco.com/message/3642024#3642024

cisco doc for setting up policy based static-nat.

http://www.cisco.com/en/US/products/ps6120/products_configuration_example09186a0080b37d0b.shtml

thanks

Rizwan Rafeek

[rizwanr74]

Pleasde rate helful post.

thanks