01-29-2013 10:31 PM - edited 02-21-2020 06:40 PM
Hi ,
We are configured the Remote IPSec VPN on cisco 1800 series router.The Clients are able to login to VPN and access the local corporate network Servers . But VPN Clients are not able to communicate with other VPN clients using their VPN Adapter IP.
Components used :
CISCO VPN Client 5.7
Router 1800 Series
Please help me.
Regards,
Shanmugam Nachimuthu.
01-29-2013 10:49 PM
Dear Shanmugam,
VPN clients should not communicate each other through VPN adapter. through RAVPN you hsould be able to connect to head end access resources in thier reachability
Regards,
Shanil
01-29-2013 11:31 PM
Hi Shanil,
Thnks for the reply..
You mean to say , VPN clients won't communicate through VPN adapter IP which get assgin from the VPN IP Pool .
is it correct?..
if it so please tell me how i make rechability between both clients using VPN Pool assiged IPs ..
Exact Requirement :
CISCO Jabber client video calling through VPN. The Cleints are registering eith server using VPN adapter IP address. When the both clients are communicating for video call , the traffic will be sent from clients VPN IP to VPN IP.so I need reachability between for those VPN client IPs.
Regards,
Shanmugam.
01-30-2013 01:39 AM
Yes. i think its not possibile to make connectivity between 2 RA VPNclients, you may need to go with any other olution
VIP,s and experts please advice and correct me if iam wrong..
Regards,
Shanil
01-30-2013 01:48 AM
I think its possibile please go through below discussion
https://supportforums.cisco.com/thread/239160
thanks
Shanil
01-30-2013 02:10 AM
I am using Remote IPSec VPN (client based )on Router 1800 Series. That discussion & link provided is for site to site VPN only.
Please help.
Components used :
VPN Client : CISCO VPN client 5.0.7
Router : CISCO 1800 series
Regards,
Shamugam
01-30-2013 11:47 PM
Dear Experts ,
Please help ASAP ...
Regards,
Shanmugam
02-01-2013 12:43 AM
Hi,
Please help..
regards.
Shanmugam
02-01-2013 01:12 AM
this is a good post..
02-01-2013 03:55 AM
Make sure your not NATing the RA IP's. the reason is the traffic leaves the firewall to get to the other IP. If you don't have a no-nat rule it will be NATed as it go's out the fire wall to the other person.
Sent from Cisco Technical Support iPhone App
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide