IPSec Site to Site VPN Solution required?

[uzair.infotech]

Hi All,

I need a solution to provide a full connectivity to one of my client. I have established two IPSEC Site to Site VPN, one between INFO and RITA and second between NIDA and RITA. I can access both machine from RITA i.e. 172.16.36.101 at INFO and 10.0.0.5 at NIDA. 

Now i need to give access to my client INFO towards NIDA's machine 10.0.0.5 without established direct VPN to NIDA i.e. Access to 10.0.0.5 from 172.16.36.101.

Could you please give me the solution how it is possible?

Regards

Uzair Hussain

[JP Miranda Z · Accepted solution]

Hi uzair.infotech,

Seems like you need to configure a hairpinning between the 3 sites, at the end your topology is going to look like this:

INFO----------------RITA-----------------NIDA

You can check this guide that explains step by step how to configure the hairpinning:

https://supportforums.cisco.com/document/12752536/how-configure-site-site-vpn-hairpinning-cisco-asa-firewall

Hope this info helps!!

Rate if helps you!! 

-JP-

[uzair.infotech]

Thanks Miranda for your reply.