cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
574
Views
0
Helpful
5
Replies

IPsec tunneling between windows2000 and cisco 2620

kawin
Level 1
Level 1

Hi,

Has any had experience setting up IPsec tunneling between a windows 2000 machine and a cisco 2620 router?

I have a cisco 2620 I can play with, so I'm experimenting with this feature.

Thanks!

Kawin

5 Replies 5

imeissner
Level 1
Level 1

Hi Kawin,

I have configured this between a PIX and win 2k box with a dynamic crypto map.

crypto dynamic-map DYN_MAP_NAME 1 set transform-set

crypto map MAP_NAME ipsec-isakmp dynamic

DYN_MAP_NAME

crypto map MAP_NAME interface

Ingolf

Greetings! Thanks for the reply.

Is there any chance you can send me a sample config or the 2620 router and the win2K setup? I'm new to this technology and would like to see a sample setup so I may learn from it!

Again thanks for all your help!

Kawin

imeissner
Level 1
Level 1

Hi Kawin,

I can send you a cutout from my PIX configuration w/o IP's

crypto ipsec transform-set IPSEC_SET_3DES ah-md5-hmac esp-3des

crypto dynamic-map DYN_MAP 1 set transform-set IPSEC_SET_3DES

crypto map IPSEC_MAP 100 ipsec-isakmp dynamic DYN_MAP

crypto map IPSEC_MAP interface outside

I can't you give the config for the win2k box, this one is configured be the customer of the other side.

Ingolf

cjacinto
Cisco Employee
Cisco Employee