VPN

I was wondering if anyone has any experience with using Cisco 2611 routers to setup a Site-to-Site VPN? Even a link to another location that might have some info would be greatly appreciated.Here's a basic rundown of the setup: The two locations both...

I would like to know what sort of Internet bandwidth I should be looking at when planning for this sort of scenario...Central office has VPN concentrator that will support 15 VPN Clients who dial into their local POP.

Has anyone used the VPN Client on Red Hat 7.2? I've installed it and followed all of the directions, but the client is not able to read the pcf files, which are correct.

Does anyone has an idea about how to make a VPN between a PIX and a PocketPC (iPAQ) and wich kind of vpn client to use with this handeld?Thanks,

I am currently using pix-to-router ipsec using nat 0 access-list and I want to also test the vpn client v1.1 for limited use. I have this set up but am having a difficult time getting a connection using the client. My pix classic is running 5.3(2)....

Can both RADIUS and TACACs be configured on the same box? What I would like to do is, configure Radius to Authenticate Users on TTY Lines 1-48 on a Cisco AS5200, 5300 and 5400. I would like to configure TACACS to Authenticate Users on the Console, ...

Trying to install VPN Client 3.5 on home machine for telecommuting purposes. Setup will not install stating that "Internet Connection Sharing" must be "Uninstalled". I have gone through the Network Connections and set what I think to be the proper ...

I'm new in Cisco VPN/Firewall products and don't know how it works in Home Users. Can someone explain:1- Can I use Cisco VPN Client Software for Home Users to Office on PIX 501?2- How it works?3- Where can I download VPN Client Software and its free ...

Greetings,A customer of mine is trying to run a Cisco VPN Client 3.5.1 from behind Microsoft ICS (on Win98SE).They claim to be having problems with it, even with the IPSec over NAT option turned on (client side)... Don't know yet if they have it turn...

Config: PIX 520, software 5.1(2), currently we static nat for about 40 PC inside firewall in order to communicate to a Nortel VPN concentrater of another big corporation. All PC have Nortel VPN client. Question: Can I just have a few statements so I ...

Is there any VPN client for solaris to connect cisco router.

Users who currently log onto the NT domain via Dial-Up Networking (DUN), must then provide the same Username Password after launching the VPN client. How can I combine both logons, DUN and VPN client, such that Username Password is only entered once....

I have two sites with DSL access. I was wondering if I could put a PIX 501 at each end and create a VPN between the two sites. I expect that there will only be one tunnel between the sites and no other locations will be included in the network. Tryin...

Need to telnet to PIX over VPN. Have local pool set up for VPN dialer as 172.16.1.1-172.16.1.50. Do I need to just setup a telnet statement to allow access from the local pool? ex: telnet 172.16.1.0 255.255.255.0 insideConfig from PIX:ip local pool ...

What are the issues you are facing with your use of VPN? What VPN issues would you like to discuss on the Networking Professionals Connection?Please let us know by posting your comments to this conversation.Thank you for visiting the Cisco Networking...