12-23-2004 09:26 PM
Hi
I have a virtual-template interface, all virtual-access interface will get same IP from the virtual-template interface, e.g,
vi100 and vi200 has same IP, is there any way that I give specify IP to vi200 ?
Thanks
12-24-2004 03:57 PM
What type of application is this virtual template interface being used in (L2TP, MLP etc) ? I would assume each vi should have a unique IP address that was negotiated in IPCP. A copy of relevant config will be helpful too.
~Zulfi
12-25-2004 09:11 AM
thanks for reply. happy holiday
that is a L2TP application.
int loop 0
ip addr 1.1.1.1 255.255.255.255
vpdn-group 1
accept-dialin
protocol l2tp
virtual-template 1
interface Virtual-Template1
ip unnumbered Loopback0
thanks
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide