I have remote site which is connected via easy VPN with Main (Hub) Site and also DNS server located in HUb location.
now while try to join domain which is located Hub location getting error.
accept this nslookup and specifying the server to be the internal DNS. Pinging any client on the internal network works, including the DNS server so it is indeed reachable. However, all attempts att name resolution ends with a time out. However, trying name resolution with an external server, such as googles, works just fine even i am able to telnet dns server.
I am involved in rolling out about 40 wifi networks using cisco 3602/2802 aps and cisco 5508 ISE. Our network offers a 2 step authentication with user and machine certificates as well as users needing to be in correct AD groups. The problem we have i...
ASA Site-to-Site VPN using IKEV1 Configuration Example
Configure a Site-to-Site IPSec IKEv1 Tunnel Between an ASA and a Cisco IOS Router
Site-to-Site IKEv2 Tunnel between ASA and Router Configuration Examples
Site-to-Site VPN Tunnel wit...
Dear Community, So, according to the Cisco ISE Release 2.7 Administrator Guide, it should be possible to use a remote lock/wipe on MDM-devices that connect through ISE on the network( see the screenshot in the attachment).The problem is that th...
Hi, We currently have 2 Cisco 5525X ASA's in active/standby state. We have 750 concurrent Anyconnect licenses with the below licenses:AC-PLSM-5YR-500-S & AC-PLSM-5YR-250-S. (These are expiring soon) I have asked to get these renewed by our l...
Hi Everyone, Does anyone know if it is possible create a NAT for Cisco Anyconnect to a different IP so that the user doesn't have to use the External IP? We want to use a different dns name and assign to a different set group of users. Thank you...