08-22-2024 05:39 AM
Hello,
I am currently using port 4443 for our Remote Access VPN. During the setup of SAML authentication with Microsoft Entra ID on a Cisco FTDv using FDM, I noticed that the entityID in the metadata does not include the specific port.
I suspect this might be a bug and wanted to check if anyone else has encountered the same issue.
Thank you in advance for your help.
Solved! Go to Solution.
08-22-2024 03:37 PM
i think you are running into this bug:
https://bst.cisco.com/bugsearch/bug/CSCwi69487?rfs=qvlogin
Please use the workaround listed in the bug
**Please rate this as helpful and solution if this was useful and solved the problem **
08-22-2024 05:50 AM
Anyconnect to ftd use port 4433
And also anyconnect open new session SAML to duo(or other) using 443
So there is two session open.
MHM
08-22-2024 03:37 PM
i think you are running into this bug:
https://bst.cisco.com/bugsearch/bug/CSCwi69487?rfs=qvlogin
Please use the workaround listed in the bug
**Please rate this as helpful and solution if this was useful and solved the problem **
08-23-2024 02:03 AM
Thanks, I confirm that the work around worked for me.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide