L2L between a ASA 5505 and WatchGuard XTM330 with dynamic IP

[Robin Olofsson]

Hi Guys, 

I've looked for a solution on this one but can't find a proper one, most threads have been old and with dead links to solution.

We have a ASA 5505 with static IP on the outside and a customer that have a WatchGuard XTM330 with dynamic IP on the outside.

Is it possible to have a L2L VPN between our ASA and the WatchGuard when it has dynamic IP? 

I dont have any experience about the WatchGuard series,

so I'm very thankfull for any replies! 

Thanks in advance and have a nice day

BR 

Robin

[Dinesh Moudgil · Accepted solution]

Hi Robin,

Here are the links that you can refer while configuring static to dynamic VPN tunnel :-
http://www.cisco.com/c/en/us/support/docs/security/asa-5500-x-series-next-generation-firewalls/112075-dynamic-ipsec-asa-router-ccp.html

This one is with Pix on remote side but the configuration will remain same on the local side:-
http://www.watchguard.com/docs/4-6-Firebox-CiscoPix.pdf

Regards,
Dinesh Moudgil

P.S. Please rate helpful posts.
 

[Robin Olofsson]

Hi Dinesh, 

Many thanks! 

I will try this and come back with the result.

BR

Robin

update: 

It work like a charm, thank you very much Dinesh!

Have a nice summer

[Dinesh Moudgil]

I am glad it is working , Robin

Regards,
Dinesh Moudgil