L2L VPN ASA to Sonicwall, ASA with dynamic IP

[Hans KRISTIAN LARSEN]

Hello everybody

I have the following Scenario.

My SIP trunk provider uses a SonicWall Pro 3060, I need to initiate a IPSec VPN tunnel from an ASA 5505 (ASA1) for SIP traffic to a PBX connected on ASA1's inside.

ASA1 should also connect a VPN to ASA2, ASA2 has a fixed IP

I have not been able to figure out how to initiate the tunnel from the ASA1 to the Sonicwall due to the dynamic IP.

Anyone, pls help.

hkl

[Federico Coto Fajardo]

Hi,

For the tunnel between the ASA and the Sonicwall (ASA having a dynamic IP), you can configure either a dynamic-to-static L2L tunnel or EzVPN.

The side having the dynamic IP (ASA) should initiate the tunnel.

Federico.

[Hans KRISTIAN LARSEN]

coto.fusionet wrote:
Hi,
For the tunnel between the ASA and the Sonicwall (ASA having a dynamic IP), you can configure either a dynamic-to-static L2L tunnel or EzVPN.
The side having the dynamic IP (ASA) should initiate the tunnel.
Federico.

Hey Federico

Thanks for your replay, beeing kind of a newbie could you point me in the right direction for the dyn to stat L2L, prefeerably using asdm.

br

hkl

[Hans KRISTIAN LARSEN]

Anyone

This issue is still not resolved, anyone who can help out?

br

hkl