11-20-2015 06:19 PM
I'm having trouble getting VPDN working on an 887 router. My windows 7 client just gives a server not responding error.
I'm using the follwoing config.
aaa new-model
!
aaa authentication login default local
aaa authentication ppp default local
aaa authorization network default local if-authenticated
!
vpdn enable
!
vpdn-group L2TP
! Default L2TP VPDN group
accept-dialin
protocol l2tp
virtual-template 10
!
username vpnuser password 0 xxxxxxxxxx
!
crypto isakmp policy 20
encr 3des
authentication pre-share
group 2
crypto isakmp key xxxxxxx address 0.0.0.0 no-xauth
!
crypto ipsec transform-set L2TP-TRANSFORM-SET esp-3des esp-sha-hmac
mode transport
!
crypto dynamic-map L2TP-TRANSFORM-SET-MAP 10
set transform-set L2TP-TRANSFORM-SET
!
crypto map L2TP-MAP 10 ipsec-isakmp dynamic L2TP-TRANSFORM-SET-MAP
!
interface Virtual-Template10
ip unnumbered Vlan1
peer default ip address pool L2TP-VPN-POOL
ppp mtu adaptive
ppp authentication ms-chap ms-chap-v2
!
interface Dialer0
crypto map L2TP-MAP
!
ip local pool L2TP-VPN-POOL 192.168.0.101 192.168.0.110
!
What am I missing?
I attached a log that shows something is going wrong at the end...
Solved! Go to Solution.
11-30-2015 03:49 PM
:)
Glad it works. I implemented that configuration on my router and tested internally by a PC.
I am not sure why it did not work internally for your test. Maybe if you configure it on another PC, it works.
Masoud
03-27-2019 09:07 AM
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide