11-12-2004 04:30 AM
Hi.
I'm curious about line bysy therefore cpu of the router up high.
I tried to show status of the line by using "show line" command. the result is below.
TS#sh line
Tty Typ Tx/Rx A Modem Roty AccO AccI Uses Noise Overruns Int
0 CTY - - - - - 10 0 0/0 -
1 TTY 9600/9600 - - - - - 4 1 0/0 -
* 2 TTY 9600/9600 - - - - - 2 15 15/46 -
* 3 TTY 9600/9600 - - - - - 3 113 5/17 -
* 4 TTY 9600/9600 - - - - - 2 13 24/77 -
* 5 TTY 9600/9600 - - - - - 2 3 2/7 -
6 TTY 9600/9600 - - - - - 2 0 8/28 -
* 7 TTY 9600/9600 - - - - - 1 109 31/101 -
8 TTY 9600/9600 - - - - - 2 34 26/79 -
9 TTY 9600/9600 - - - - - 1 1 5/16 -
10 TTY 9600/9600 - - - - - 0 0 0/0 -
* 11 TTY 9600/9600 - - - - - 0 22 30/97 -
* 12 TTY 9600/9600 - - - - - 0 19 29/90 -
13 TTY 9600/9600 - - - - - 0 1 16/48 -
14 TTY 9600/9600 - - - - - 0 0 0/0 -
15 TTY 9600/9600 - - - - - 0 0 0/0 -
16 TTY 9600/9600 - - - - - 0 0 0/0 -
17 AUX 9600/9600 - - - - - 0 0 0/0 -
* 18 VTY - - - - - 12 0 0/0 -
19 VTY - - - - - 0 0 0/0 -
20 VTY - - - - - 0 0 0/0 -
21 VTY - - - - - 0 0 0/0 -
22 VTY - - - - - 0 0 0/0 -
I did't try to connect vty 2,3,4,5,7,11,12.
But the line is busy...
Acually, this router(C2500) is terminal server.
How can i fix it?
11-12-2004 08:06 AM
Lines 2,3--11,12 are tty lines not vty. The vty lines are 18-22.
You probably have some active session on those tty lines so are getting a busy. "show session" will indicate the same.
In order to clear the lines (say line 3);
Router#clear line 3
[confirm]
[OK]
Thanks, Mak
11-14-2004 03:39 AM
thank you for helping.
i don't try to connect any connection.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide