03-29-2010 08:50 AM
I received the following error when trying to load a k9 IOS image on one of the 2960 switches. Can someone tell me how to fix this problem?
Error: The image to be installed on system 1 (`c2960-lanbasek9-mz.122-52.SE')
Error: is the same as an existing image, and the `/overwrite' option
Error: was not selected. Try again, either by removing the old image
Error: first, or by selecting the `/overwrite' option.
Almost forgot the command I used was: arc download-sw /safe tftp://10.xx.xx.xx/c2960-lanbasek9-tar.122-52.SE.tar
Thanks,
glh
Solved! Go to Solution.
03-29-2010 09:12 AM
You're trying to upgrade the switch with the exact same IOS.
03-29-2010 09:12 AM
You're trying to upgrade the switch with the exact same IOS.
03-31-2010 08:45 AM
Thanks Collin that helped. I had a brain freeze apparently.
Thanks again,
glh
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide