VPN

I am just starting to configure GETVPN in the lab before puting it in production and I am having a lot of issues. Hope I can get some help here :1) "sh crypto iskmp sa" display the tunnels for about 10 minute and after that we don't any ipsec tunnel...

Hi,We have recently change our TBAR timer to allow for latency on the WAN. We have also made some big routing changes to our network.I noticed that out GETVPN Kek Timer is set to the default as well as our TEK Policy timer.I was wondering is this loo...

I'm VERY new to the Cisco firewall interface, OS and all.  I've got VPN sort of working for me but I have an issue that is kind of strange.  I can VNC on port 5950 to ONE machine (my own) that is also configured as a machine that can run the ASDM and...

Hi; The structure of the IP header may be a 5 words of 32 bits including the following fields: -         Version (4bits) , IHL (4bits) , TOS (8 bits), Total length(16 bits)-         Identification (16 fields), flags(3 bits) , fragment offset ( 13 bi...

Hello Folks,we are trying to setup a failover connection to a dmvpn, our primary connection is mpls we have over 20 sites all connected on the mpls network, each site has their own subnet, what we want is to send all the traffic thru the mpls and whe...

/* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5...

Hi Guys,recently i have created a remote access on my IOS router acting as VPN gateway, this router has multiple IPsec tunnels..I have users connected through IPhone/data cards etc to connect through remote access tunnel.When a user gets connected a ...

How do I configure password expiration in Cisco VPN client if the user account is in Windows Database?

I have 2 tunnels that work fine. I tried adding a third tunnel. When I go to test it in packet tracer I get a failure at the second vpn lookup which is encryption. When packet tracing the other two tunnels, they look identical except they don't fail....

We are configuring a remote site with an ASA 5580 at each site.  Our IP segment for the server [which they are to have access to] uses the same segment for other services within their organization.  Our server is one of the core servers which our phy...

I have a site to site ipsec tunnel between 2 IOS routers and in the crypto map I have reverse-route added. Let's say on that crypto map's match address it's permitting its source network access to 2 remote subnets. If only traffic is generated to one...