Missing crypto isakmp command on C8200-1N-4T

[john-dass]

Missing crypto ikev2 / ipsec command on C8200-1N-4T

TEST-R1B-8200(config)#crypto ?
RSA-key-pair RSA key pair
key Long term key operations
pki Public Key components
provisioning Secure Device Provisioning
wui Crypto HTTP configuration interfaces

[Rob Ingram]

@john-dass I would guess you don't have the required license to use IKE/IPSec.

[john-dass]

Hi Rob,

I'm doing a PoC of the new 8200 series routers which is being staged in my office. They will replace my 4200/4300 series routers in the near future a total of 400 routers enterprise wide.

I ran the command : license boot level network-premier addon dna-premier then reloaded but to no avail..

Technology Package License Information:

-----------------------------------------------------------------
Technology Type Technology-package Technology-package
Current Next Reboot
-----------------------------------------------------------------
Smart License Perpetual network-premier network-premier
Smart License Subscription dna-premier dna-premier

[MHM Cisco World]

https://www.cisco.com/c/en/us/products/collateral/routers/catalyst-8200-series-edge-platforms/catalyst-8200-series-edge-platforms-faq.html

You need license for ipsec check link

[Salman Mahajan]

Hi @john-dass 

Please configure the below command:This command will ask for a reload, after the reload try once again the crypto command
#license boot level network-advantage 

[amkfd1]

Having same issue