cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
385
Views
0
Helpful
1
Replies

ms pptp client to pix 501

jcomitas
Level 1
Level 1

I connect to the pix via pptp and vpdn setup, but the default gateway is missing for the ppp interface -

PPP adapter ocp:

Connection-specific DNS Suffix . :

Description . . . . . . . . . . . : ocp

Physical Address. . . . . . . . . :

DHCP Enabled. . . . . . . . . . . : No

Autoconfiguration Enabled . . . . : Yes

IPv4 Address. . . . . . . . . . . : 192.168.2.10(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.255

Default Gateway . . . . . . . . . :

DNS Servers . . . . . . . . . . . : 192.168.1.2

Primary WINS Server . . . . . . . : 192.168.1.2

NetBIOS over Tcpip. . . . . . . . : Enabled

Wireless LAN adapter Wireless Network Connection:

Connection-specific DNS Suffix . : Susan1

Description . . . . . . . . . . . : Intel(R) PRO/Wireless 2200BG Network Connection

Physical Address. . . . . . . . . : 00-15-00-3A-37-5D

DHCP Enabled. . . . . . . . . . . : Yes

Autoconfiguration Enabled . . . . : Yes

Link-local IPv6 Address . . . . . : fe80::90f6:f171:ad58:3ca8%8(Preferred)

IPv4 Address. . . . . . . . . . . : 192.168.1.112(Preferred)

Subnet Mask . . . . . . . . . . . : 255.255.255.0

Lease Obtained. . . . . . . . . . : Wednesday, August 22, 2007 1:20:07 PM

Lease Expires . . . . . . . . . . : Friday, August 24, 2007 5:08:19 AM

Default Gateway . . . . . . . . . : 192.168.1.1

DHCP Server . . . . . . . . . . . : 192.168.1.1

DHCPv6 IAID . . . . . . . . . . . : 167777536

DNS Servers . . . . . . . . . . . : 4.2.2.2

4.2.2.1

NetBIOS over Tcpip. . . . . . . . : Enabled

and the route for the .2 network is the outside interface of the pix -

IPv4 Route Table

===========================================================================

Active Routes:

Network Destination Netmask Gateway Interface Metric

0.0.0.0 0.0.0.0 192.168.1.1 192.168.1.112 25

70.169.230.65 255.255.255.255 192.168.1.1 192.168.1.112 26

127.0.0.0 255.0.0.0 On-link 127.0.0.1 306

127.0.0.1 255.255.255.255 On-link 127.0.0.1 306

127.255.255.255 255.255.255.255 On-link 127.0.0.1 306

192.168.1.0 255.255.255.0 On-link 192.168.1.112 281

192.168.1.112 255.255.255.255 On-link 192.168.1.112 281

192.168.1.255 255.255.255.255 On-link 192.168.1.112 281

192.168.2.0 255.255.255.0 70.169.230.65 192.168.2.10 26

192.168.2.10 255.255.255.255 On-link 192.168.2.10 281

224.0.0.0 240.0.0.0 On-link 127.0.0.1 306

224.0.0.0 240.0.0.0 On-link 192.168.1.112 281

255.255.255.255 255.255.255.255 On-link 127.0.0.1 306

255.255.255.255 255.255.255.255 On-link 192.168.1.112 281

255.255.255.255 255.255.255.255 On-link 192.168.2.10 281

===========================================================================

both networks are 192.168.1.x, home and office. What can I do?

1 Reply 1

carenas123
Level 5
Level 5

Please click the following URL which will teach you how to configure PIX 01 as PPPoE client

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00801055dd.shtml#table2