05-04-2017 01:49 AM
I need to to set up a site to site vpn between two Cisco ASA's. I need mulitple networks from each end to be able to communicate over the vpn connection.
My question is, when I set the site-to-site vpn up using the wizard on ASDM, do I simply need to configure an object-group network and add each network as a network-object to the group? So I would have multiple network-objects representing my networks, and they all fall under the object-group.
If this is the case then on the site-to-site vpn wizard do I then just select the object-group's I wish to use for the local and remote networks?
Many Thanks
James
Solved! Go to Solution.
05-04-2017 02:02 AM
Yes - that's correct.
05-04-2017 02:02 AM
Yes - that's correct.
05-04-2017 02:08 AM
Thank you Marvin
05-04-2017 02:27 AM
You're welcome. Please mark your question as naswered if it has been.
05-12-2017 07:46 AM
Hi Marvin.
Not sure if you may be able to assist me further :) I have an additional question now open which I'm sure you will be able to answer.
https://supportforums.cisco.com/discussion/13294391/cisco-asa-site-site-vpn
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide