Hi all,
I wanna to install an LNS for PPTP tunnel ending,I created "vpdn-group 1" and "vpdn-group 2", which connect to "vpdn-group 1" put into vrf "test1" ,
connect to "vpdn-group 2" put into vrf "test2". when i use windows xp client connect ,i saw all sessions terminate within the group "vpdn-group 1",
the 2nd group is not used at all. Then i remove "vpdn-group 1",saw "vpdn-group 2" was worked well.Anybody can tell me why?Thx.
-----------------------------------------
ip cef
ip vrf test1
rd 1:1
route-target export 1:1
route-target import 1:1
!
ip vrf test2
rd 2:2
route-target export 2:2
route-target import 2:2
!
ip dhcp pool test1
vrf test1
network 192.168.1.0 255.255.255.0
default-router 192.168.1.1
dns-server 202.96.134.133 202.96.128.6
!
ip dhcp pool test2
vrf test2
network 192.168.2.0 255.255.255.0
default-router 192.168.2.1
dns-server 202.96.134.133 202.96.128.6
!
username vpn1 password 0 vpn1
username vpn2 password 0 vpn2
aaa new-model
aaa authentication ppp default local
aaa authorization network default local
!
interface Loopback11
ip address 202.96.1.1 255.255.255.255
!
interface Loopback12
ip address 202.96.1.2 255.255.255.255
!
interface Loopback101
ip vrf forwarding test1
ip address 10.0.0.1 255.255.255.0
!
interface Loopback102
ip vrf forwarding test2
ip address 10.0.0.1 255.255.255.0
!
interface Virtual-Template1
ip vrf forwarding test1
ip unnumbered Loopback101
peer default ip address dhcp-pool test1
ppp authentication chap ms-chap
!
interface Virtual-Template2
ip vrf forwarding test2
ip unnumbered Loopback102
peer default ip address dhcp-pool test2
ppp authentication chap ms-chap
!
vpdn enable
!
vpdn-group 1
! Default PPTP VPDN group
accept-dialin
protocol pptp
virtual-template 1
vpn vrf test1
source-ip 202.96.1.1
!
vpdn-group 2
accept-dialin
protocol pptp
virtual-template 2
vpn vrf test2
source-ip 202.96.1.2
!