VPN

Hi,I have an ASA infrastructure where we need to authenticate the client via a MS cert and AD credentials. I have followed most of the documents from the website, but getting "CRYPTO_PKI: Cert record not found, returning E_NOT_FOUND" errors. Would so...

If I use Multiple set peer statements in a crypto map on an IOS router to allow redundancy will the router be allowed to both initiate and accept connection requests?On an ASA multiple peers can only be used with the initiate-only connection type.

Can you setup the vpn so that it automatically connects to the internet when you connect the vpn with your pswd?

Hi,I using ASA 8.0(4) and use the IPsec VPN wizard to configure my vpn client.Internal ip: 192.168.100.0/24VPN ip: 192.168.2.0/24I managed to est the connection but i can't ping to any servers or pcs in the Internal network. Can anyone please alighte...

Hii have a 5510 setup behind an 877adsl router which does a static nat for all ports towards the ASA. this ASA is configured as an ezvpn server. i have no problems connecting to it with the software vpn clients. but the problem is when i use another ...

hello,is there a sample config for router to terminate a static and also dynamic connection?a 3845 wants to establish static ipsec to a remote branch for management, and also need dynamic ipsec for client client. how would crypto map be configured?th...

We recently replaced our PIX515e with an ASA5510. It is running 8.0.4 code. After we installed the ASA our IPSec remote access VPN connections have been dropping off after approximately 2 - 3 minutes (whether there is activity or not). Below is what ...

I currently have ASA VPN that is cofigured to work with NAC inline mode with Virtual GW and CCA using Single Sign On and Active Directory via a MS IAS server. Everything works fine. We want to have vendors use this solution as well but do not want to...

Dear techies I have 2 NAC Servers 3310 appliancesand NAC Managers 2 no model no b3350 appliance I have 20 vlan configured for the data vlan in the network and default gateway is core switches interface vlan IP address using HSRP .I read the document...

Hello,I have configured an ezvpn beetween Cisco 851 and ASA 5520. The vpn is UP but i can't ping the C851 vlan interface.There is nothing connecte to the routeur. Is the router only forward paquets to the vlan interface if the LAN interface is up ?Wh...

Hi, I want information about ASA 5510,how many number of modules we can use in or number of slots for modules.

Hi,I have a remote VPN with split tunnelling enabled. Currently, a user connected to this VPN browses internet with his/her internet connection. Now, my requirement is that a roaming user connecting to the vpn must use our company's internet connecti...

I'm monitoring a set of 3060 concentrators using SNMP but all I'm getting is bandwidth. I would like to know if I can get more information from it like CPU, Load and what ever else I can get from it? What application do you think I would be able to g...

My firewall is setup with cbac on lan to public interface and acls inbound from public to lan. When cisco VPN clients connect outbound they authenticate and register fine but only when a permit IP acl from secure host allows me to route. when testing...