i am running into problems trying to NAT incoming vpn connections. here are all the outputs that i think would show the problem. if you need more please ask
access-list vpn_nat extended permit ip 192.168.241.0 255.255.255.0 192.168.1.0 255.255.255.0 log
nat (Outside) 1 access-list vpn_nat
but I do not see the hit count increasing on the nat
NAT policies on Interface Outside:
match ip Outside 192.168.241.0 255.255.255.0 Outside 192.168.1.0 255.255.255.0
dynamic translation to pool 1 (207.xxx.xx.xx [Interface PAT])
translate_hits = 0, untranslate_hits = 0
DCP-ASA5520-2# sh vpn-sessiondb remote
Session Type: Remote
Username : remote
Index : 1
Assigned IP : 192.168.241.0 Public IP : 12.xx.xx.xx
Protocol : IPSec Encryption : 3DES
Hashing : MD5
Bytes Tx : 0 Bytes Rx : 3297
Client Type : IOS Client Ver : 12.4(4)T2
Group Policy : remote_sites
Tunnel Group : remote_sites
Login Time : 06:31:29 UTC Thu Mar 29 2007
Duration : 0h:10m:31s
Filter Name :
NAC Result : Unknown
Posture Token:
Here are my pools for the incoming vpn's
ip local pool NAT_VPN_Routers 192.168.1.230-192.168.1.245 mask 255.255.255.0
tunnel-group remote_sites general-attributes
address-pool NAT_VPN_Routers
