NAT Transparent Mode for IPSec on PIX

shariff_99 · ‎05-07-2005

Hello there,

Could anyone please suggest below topic,

How to Configure NAT Transparent Mode for IPSec on the PIX firewall... not on VPN concentrator ?

thanks a lot

sachinraja · ‎05-09-2005

hello shariff,

you can enable "isakmp nat-traversal 20" on the pix firewall ... once u do this, you can have ipsec through nat/pat connections... try this and let us know

Raj

shariff_99 · ‎05-09-2005

Is there any other configuration has to be done at VPN client side, such as ENABLING TRANSPARENT TUNNELING USING TCP OR UDP , IF TCP THEN HOW TO SET THE PORT ON FIREWALL...