02-15-2016 01:14 PM
Hi,
I have a problem a make a VPN connection between two asa 5505 v 8.2, and i think that is a Nat problem. i have a cmd and i cannot do it in the asa 5505 V8.2:
nat (inside,outside) source static 192.168.0.0 192.168.0.0 destination static 192.168.1.0 192.168.1.0 ??
02-15-2016 01:38 PM
Hello,
For ASA version 8.2 the nat exemption needs to be configured like this:
define an access list with the VPN traffic
access-list nonat extended permit ip local_subnet mask remote_subnet mask
configure nat rule:
nat (inside) 0 access-list nonat
Regards, please rate.
02-16-2016 02:56 AM
i configured but il still not connecting !!
02-16-2016 06:09 AM
i have this msg ever when i configure a crypto map entry :
ciscoasa(config)# Feb 16 06:43:38 [IKEv1]: Ignoring msg to mark SA with specified coordinates <vpnmap, 10> dead
aby ideas ??
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide