09-17-2017 05:48 AM - edited 03-12-2019 04:32 AM
Hi All
Need help.
While I was installing anyconnect image i am getting below error in my lab with
IOS Version : ASA 8.4 (2) in GNS3
ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$
ERROR: Not a valid Anyconnect image - invalid comment (NULL)
What could be the issue ?
BR//Subrun
09-17-2017 09:11 AM
Please share the output of the following to confirm the image is present with the correct filename:
dir disk0:/
09-17-2017 08:48 PM
Thanks for asking. Here is the dir disk0 output.
ciscoasa# dir disk0:
Directory of disk0:/
829 -rwx 31522773 01:11:16 Sep 17 2017 anyconnect-win-3.1.03103-k9.pkg
09-17-2017 09:22 PM
Hmm, that looks correct and the file size is what we would expect.
It could possibly be corrupted - have you tried deleting it from the disk and re-uploading it? What method are you using for upload - tftp, ftp, https via ASDM or something else?
It could also be a GNS3 artifact. I prefer to work with ASAv directly on ESXi if I don't have an ASA hardware appliance handy to practice with.
09-20-2017 07:04 AM
Hi,
Had exactly the same problem, solved it by deleting the image on flash and then tftp'ing it back on. was tryign to copy it from a usb stick Originally.
HTH
10-14-2017 04:20 PM
Now I downloaded the image from another different source. Look Like I am getting different error as like below.
ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$
Failed to unzip the Anyconenct Package
ciscoasa(config-webvpn)#
Also attached the RAM settings for ASA in GNS3.
Please help.
10-14-2017 04:22 PM
dir disk0:
ciscoasa# $ 536567808 bytes total (501104640 bytes free)
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: