Not a valid Anyconnect image - invalid comment (NULL)

[mdsubrunjamil]

Hi All

Need help.

While I was installing anyconnect image i am getting below error in my lab with 

IOS Version : ASA 8.4 (2) in GNS3

ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$
ERROR: Not a valid Anyconnect image - invalid comment (NULL)

What could be the issue ?

BR//Subrun

[Marvin Rhoads]

Please share the output of the following to confirm the image is present with the correct filename:

dir disk0:/

[mdsubrunjamil]

 Hi Marvin Rhoads

Thanks for asking. Here is the dir disk0 output.

ciscoasa# dir disk0:

Directory of disk0:/

829 -rwx 31522773 01:11:16 Sep 17 2017 anyconnect-win-3.1.03103-k9.pkg

[Marvin Rhoads]

Hmm, that looks correct and the file size is what we would expect.

It could possibly be corrupted - have you tried deleting it from the disk and re-uploading it? What method are you using for upload - tftp, ftp, https via ASDM or something else?

It could also be a GNS3 artifact. I prefer to work with ASAv directly on ESXi if I don't have an ASA hardware appliance handy to practice with.

[cae_technology]

Hi,

Had exactly the same problem, solved it by deleting the image on flash and then tftp'ing it back on. was tryign to copy it from a usb stick Originally.

HTH

[mdsubrunjamil]

Now I downloaded the image from another different source. Look Like I am getting different error as like below. 

ciscoasa(config-webvpn)# anyconnect image disk0:/anyconnect-win-3.1.03103-k9.p$
Failed to unzip the Anyconenct Package
ciscoasa(config-webvpn)#

Also attached the RAM settings for ASA in GNS3. 

Please help.

[mdsubrunjamil]

dir disk0:

ciscoasa# $   536567808 bytes total (501104640 bytes free)