04-19-2013 01:44 PM
Does anyone know the proper settings with SecureCRT to dial an OOB modem? We use Verizon managed services and although they test the modems, we want to as well. Any setting I try in SecureCRT results in a blinking cursor but no Router> prompt. Has anyone had luck with the TAPI option on SecureCRT?
04-19-2013 02:33 PM
You may want to explain what exactly you're trying to do, because it's not clear.
04-19-2013 02:38 PM
I have US Robotics 3453 modems connected to the console ports of my routers. The modems and console cables are good as Verizon can verify them, I too need to be able to dial in. When I try to dial from my laptop, I get a blinking cursor each time and no router prompts. I am using the following settings in SecureCRT
Port Speed: 9600
Data Protocol: Standard EC
Compression: Disabled
Flow Control: None
Data Bits: 8
Parity: None
Stop Bits: 1
Modulation: Standard
My modem on my laptop dials fine and I have verified that the lines are good.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide