pix 6.3 VPN with NATed interface

[zlabovic]

Hello,

I need to know is there a way to create a VPN tunnel using a NATed ip address of a dmz interface as VPN peer in configuration? This VPN needs to be configured on pix 6.3.5.

I have done the static translation of the dmz interface and have enabled access to NATed adress of the dmz interface from outside, but the ping between the VPN peers fails

Any help would be highly appreciated

[didyap]

Do you have the command "isakmp nat-t" configured? If, No, add this command.