12-16-2003 01:09 PM - edited 02-21-2020 12:57 PM
Hi,
I am attempting to connect a PIX-506 (ver 6.3 (3) to PIX-515 with a VPN tunnel to connect a NT domain for Logons, DHCP etc...
Am I on the right track with this configuration?
Site A to Site B
interface Tunnel70
ip address 66.XXX.XXX.XXX 255.255.255.248
tunnel source Ethernet0/0
tunnel destination 68.XXX.XXX.XXX
tunnel mode ipip
!
!
interface Ethernet0/0
description To Remote LAN
ip address 192.168.1.1 255.255.255.0
!
interface Serial0/0
description link to Site B
ip address 66.XXX.XXX.XXX 255.255.255.248
service-module t1 clock source internal
!
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.1.1
ip route 68.XXX.XXX.XXX 255.255.255.0 Tunnel70
Site B to Site A
interface Tunnel70
ip address 68.XXX.XXX.XXX 255.255.255.248
tunnel source Ethernet0/0
tunnel destination 66.XXX.XXX.XXX
tunnel mode ipip
!
!
interface Ethernet0/0
description To Remote LAN
ip address 192.168.1.32 255.255.255.0
!
interface Serial0/0
description link to Site A
ip address 66.XXX.XXX.XXX 255.255.255.248
service-module t1 clock source internal
!
ip http server
ip classless
ip route 0.0.0.0 0.0.0.0 192.168.1.32
ip route 66.XXX.XXX.XXX 255.255.255.0 Tunnel70
TIA, Cheers,
G
12-17-2003 01:46 AM
Hi,
these are router configurations not pix. can you explain more what you want to do, and what are your devces?
12-17-2003 02:21 PM
You may want to look at the following link for PIX to PIX connections:
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide