PPTP

[Create Share]

Hi!

I need to configure PPTP on Cisco 1841 and 800 Series Routers so that i can connect to them using Windows VPN Client to access LAN pcs. Can somebody give me a sample configuration?

Thanks!

[Federico Coto Fajardo]

Here you go:

http://www.cisco.com/en/US/tech/tk827/tk369/technologies_configuration_example09186a00801e51e2.shtml

Federico.

[Create Share]

Thanks it worked but i am unable to use Internet on my pc after establishing PPTP connection and if i disable Gateway on vpn connection then i cannot connect to internal network. I used a different IP Range for VPN clients DHCP than internal network.

Thanks!

[Federico Coto Fajardo]

PPTP connections does not use the concept of split-tunneling on the server side.

Therefore you cannot configure the router for split-tunneling.

There are some work-arounds to configure split-tunneling on the client side (I remember something about modifying the metric on the gateway to send only certain traffic through the tunnel)... but it's on the client side.

Federico.

[Federico Coto Fajardo]

Hope this helps:

http://www.isinc.com/2008/04/11/configuring-a-split-tunnel-pptp-vpn-in-windows-vista/

Federico.