Buy or Renew
Buy or Renew
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
281
Views
0
Helpful
1
Replies

Problem HTTP/Telnet login into VPN 3000

jliscano
Level 1
Level 1

‎08-22-2002 03:21 PM - edited ‎02-21-2020 12:01 PM

Having a problem with a 3015 Concentrator. For some reason I can access the 3015 Concentrator through the Console with the admin username and password. But when I access through HTTP or Telnet, it's says my username/password is not correct. I was able to access it before through Console, HTTP, and Telnet until I turned it off (relocated it to another building). I am running the version 3.5.4.Rel-k9, I am using IE 5.5, I also did save the config prior to turning it off, no access control list configured. Anyone run into this problem??? Thanks in advance.

Jerome

Labels:
0 Helpful
1 Reply 1

awaheed
Cisco Employee
Cisco Employee

‎08-22-2002 05:59 PM

Hi Jerome,

Check if you defined any TACACS server for managing the admin users. Try with the Console again using the same username password and if it works for you then it must be the TACACS server configured.

Hope this helps.

Regards,

Aamir

-=-

0 Helpful
Customers Also Viewed These Support Documents