Hi all...
I hope someone can help me with this issue...
I have Windows server 2003 x64 and cisco vpnclient-winx64, ver.5.0.07.0290-k9 installed. VPN end point is Cisco PIX 515e, version 8.0.(4).
I have problems establishing the vpn connection sometimes with error : Reason 442, Failed to enable virtual adapter.
If I try to connect for a second time, it connects without errors. I must use split tunneling so I can reach only 1 host over the Cisco VPN adapter ,all other network traffic is been sent normally, over the unencrypted Ethernet link.
But when Cisco VPN Client is connected, when I do route print in windows, I cannot see this specific route for this host to go over VPN Adapter, so it actually means that the vpn is not working properly. I also cannot see any packet coming in or our vnp on mu PIX.
This problem is only in windows x64, I have several other 32 bit servers configured this way without any problem.
So please, any suggestions, new version of VPN client or some configuration about this problem would be highly appreciated
Regards