Proper license for Cisco AnyConnect on Cisco ASA 5505 device

[cwditdept]

Hello,

We have a Cisco ASA5505, 512 MB RAM, CPU Geode 500 MHz with the following features:

Licensed features for this platform:
Maximum Physical Interfaces    : 8
VLANs                          : 20, DMZ Unrestricted
Inside Hosts                   : Unlimited
Failover                       : Active/Standby
VPN-DES                        : Enabled
VPN-3DES-AES                   : Enabled
SSL VPN Peers                  : 2
Total VPN Peers                : 25
Dual ISPs                      : Enabled
VLAN Trunk Ports               : 8
Shared License                 : Disabled
AnyConnect for Mobile          : Disabled
AnyConnect for Cisco VPN Phone : Disabled
AnyConnect Essentials          : Disabled
Advanced Endpoint Assessment   : Disabled
UC Phone Proxy Sessions        : 2
Total UC Proxy Sessions        : 2
Botnet Traffic Filter          : Disabled

This platform has an ASA 5505 Security Plus license.

On several vendor websites, such as CDW and Ingram Micro, they have similar AnyConnect products with various pricing.

First, which one of the following is appropriate for my device?

• L-ASA-AC-E-5505=
• ASA-AC-E-5505
• ASA-AC-E-5505=

Second, out of curiosity, what are the differences, if any?

Finally, once purchased, does the license give us access rights to download the AnyConnect client (I'm guessing yes)?

Thank you.

Milke

[jj27]

The difference is the L-ASA-AC-E-5505= version is an E-Delivery license. The plain ASA-AC-E-5505 is a physical, hard copy that is mailed to you.

Yes, it should give you access to download the client.  Note: AnyConnect 4.0 was released and the licensing model has changed. I think the cutoff to order the legacy SKUs has not been reached yet, though.

[cwditdepart]

Thank you very much for your help jjohnston!