VPN

Hi, We have MAC and PC users. Both users could reach inside network through ASA and Anyconnect VPN. however, MAC users cannot have connection(Please see screenshot in attachment). The output of command show run webvpn is below: act(config-webvpn)# sh...

Hello and thank you for reading. This is a new configuration and I need support. I do have TAC support but it has not proven successful. Internet - > Cisco ASA -> Juniper SRX -> Extreme L3 SW -> PCA What I have done so far is install the latest AnyCo...

Hi We have MAC and PC users. We setup Anyconnect VPN in one ASA. But the both users need two kinds image. so we need to use two commands:anyconnect image disk0:/anyconnect-win-3.1.04066-k9.pkganyconnect image disk0:/anyconnect-macosx-i386-2.5.2014-k9...

Hi!There  two offices (as an example, in reality an unlimited number of them). One of them is mine, but the infrastructure of the other one is the property of other company, and accordingly is administrated by the other person.On both sides there is ...

Hi I would like to confirm the certificate can work well.  So, I need to copy a web page from one asa to another for Anyconnect VPN. and then test if the certificate can work well. Now I need to know where web page is in the ASA or how the ASA associ...

I have a couple of site to site vpns working correctly on a 5515 ASA. Not sure what is the other side as I have no view of them. I have configured an SSL vpn for remote users who need to be able to access resources on the remote sites. I have got the...

Hello friendPls helpGiven below from other site , server ip 172.16.5.10 and public ip address 41.59.251.X , i need to create tunnel so that myserver with ip 172.17.18.41 and my public ip address 41.59.251.Y should able to communicate with remote serv...

Hello comunity! I have few tasks with AnyConnect wich I must to do, but have no idea how. Please help. The tasks are:1. Disable IPv6. We have no running IPv6 services, and clients with IPv6 create for us additional routine.2. Prevent AnyConnect IPs f...