03-16-2012 07:12 AM
Hi Guys,
i have a question about VPN Tunneling. I have one ASA 5505 with static PPPoE Adress outside and local 192.168.202.0/24 Network, acting as an EasyVPN Server. On the other side is another ASA 5505 without dynamic PPPoE outside interface acting as EasyVPN Client in client ode. Inside network is 192.168.1.0/24
This works pretty well! But now i have created another user that uses an software EasyVPN client to connect the EasyVPN Server. This works as well.
But how am i able to connect the client network 192.168.1.0/24 over the ASA connections?
Please give me some hint.
Solved! Go to Solution.
03-16-2012 08:01 AM
"But how am i able to connect the client network 192.168.1.0/24 over the ASA connections?"
Yes, if you set the split-tunnel ACL correctly you should be able connect to remote-client ASA.
Please follow the split-tunnel configuration method from Cisco doc, from below link.
Please rate helpful post.
Thanks
Rizwan Rafeek
03-16-2012 08:01 AM
"But how am i able to connect the client network 192.168.1.0/24 over the ASA connections?"
Yes, if you set the split-tunnel ACL correctly you should be able connect to remote-client ASA.
Please follow the split-tunnel configuration method from Cisco doc, from below link.
Please rate helpful post.
Thanks
Rizwan Rafeek
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide