01-07-2003 07:32 AM - edited 02-21-2020 12:16 PM
when I make a session between vpn 3002 hardware client at remote site and concentrator 3000 series or PIX or Router at central site. "Server A" is located at remote site and "Server B" is located at Central site. "Server A" and "Server B" communicate with IPSEC Tunnel. I know that "Server A"(at remote site) can initiate make a session to "Server B"(central site). Is it possible that "Server B"(central site) initiate make a session to "Server A"(remote site) ?
Solved! Go to Solution.
01-07-2003 09:38 AM
Hi sbjeong,
If you are running NEM mode on the 3002, then either servers can initiate the traffic assuming that the IPSec tunnel between your 3002 and the VPN server (PIX, IOS, VPN3K ) is established
Jazib
01-07-2003 09:38 AM
Hi sbjeong,
If you are running NEM mode on the 3002, then either servers can initiate the traffic assuming that the IPSec tunnel between your 3002 and the VPN server (PIX, IOS, VPN3K ) is established
Jazib
03-07-2003 06:51 AM
Have you tryed adding a route statement on server b pointing to the vpn and on the vpn point back to the public interface. Can you initiate a ping from your VPN to the Remote sites VPN? It is the same issue. Try that and see if that helps.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide